Highest Market Fixture Efficacy of 2.7 µmol/J!
- Lowest $/µmol
- High PPF output for high intensity: 1620 µmol/s
- Highest Market Fixture Efficacy: 2.7 µmol/J
- Ideal Full-Spectrum
- Fully dimmable
- Detachable driver
- Top class diodes & drivers
- Interchangeable magnet LED bars
- Easy to set up
- External control with Photontek Digital Controller
- 5 years warranty
Check out: Photontek Digital lighting controller
Stunning features with high-quality components
Producing a total PPF output of 1620 µmol/s and a Photon Efficacy (fixture efficiency) of 2.7 µmol/J, PHOTONTEK X 600W Pro LED creates a homogeneous light spread at a close distance from the crop canopy, resulting in outstanding results when used in indoor multi-layer cultivation systems, grow rooms and tents.
When compared to regular similar wattage High Pressure Sodium solutions, the PHOTONTEK X 600W PRO LED can achieve 30-40% less HVAC capacity and increased yields of up to 30-60%.
The X 600W PRO LED is built using high quality and durable PHOTONTEK drivers and top bin LEDs generating an optimized full-spectrum light source ideal for veg and flowering stages.
The X 600W Pro is designed with both vegetative and flowering growth periods in mind and the LED may be dimmed, allowing you to adjust PPFD levels produced without losing efficiency.
Increasing the output and improving light maintenance
This dynamic, highly efficient and low-powered LED fixture configuration, with six 100W LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.
Choose to run anything from a single light bar to the full 6 line-up at any intensity you need by simply adding or removing the desired amount using the fixtures’ innovative smart and easy, click-magnet design. The driver can also be detached from the fixture and used away from the fixture for your convenience.
In addition, the PHOTONTEK X 600W PRO LED fixture can be externally controlled with a PHOTONTEK Digital Lighting Controller featuring light timing, automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.
Universal Control Systems Compatibility
PhotonTek Pro LED Fixtures can be fully controlled with either the PhotonTek Digital Controller or with any other Control System that utilizes 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.
- Efficacy: 2.7 µmol/J
- PPF: 1620 µmol/s
- Input Voltage: 120-270V
- Power Consumption: 600W
- Coverage Area: 4’ x 4’ – 5’ x 5’
- Waterproof: IP65
- Lifetime: 60 000 Hrs
- Light Distribution: 120°
- Light Source: Osram & Lumileds Philips Diodes
- Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
- External Control: With PHOTONTEK Digital Controller
- Weight: 29.76 Lbs
- Dimensions: 42.95’’ x 46.55’’ x 2.04’’
- Spectrum: Full Spectrum
- BTU (With Driver Attached): 2115 BTUs/h
- BTU (With Driver Remote): 2047 BTUs/h
- 6 x PHOTONTEK 100W Full-Spectrum Magnet LED Bars
- 1 x PHOTONTEK 600W Driver with Connecting Cables
- 1 x LED Structure with Connecting Cables
- 2 x Power Cables (NEMA 5-15P Plug for 120V & NEMA 6-15 P Plug for 240V)
- 1 x 0-10V Light Dimmer + Velcro
- 2 x Metal Cable Hangers
- 1 x Manual